Jasmine

Crafters, I am so excited about this pattern.

I have always loved Jasmine for her spunk and her values. But when I set out to crochet her, I came across a very large roadblock: I didn’t know how to properly crochet legs.

This pattern took a long time to develop because of that, but after I figured out the legs, the rest of the pattern came together so smoothly! Now that I’ve learned how to work the legs, there is so much more I can do; it’s like I’ve been shown a whole new world of crochet. (Too much?)

Enjoy!

_DSC4136-2

Princess Jasmine (Aladdin) Amigurumi

Materials:

  • Yarn colors: cream/skin tone, turquoise, gold, dark gold, purple, blue and black. (I used up some miscellaneous yarns in my stash, which were all Red Heart yarns.)
  • Size D/3-3.25mm hook
  • 2 6mm safety eyes
  • POLY-FIL Fiber (100% Polyester Fiberfil) “stuffing”
  • Tapestry Needles

Pattern – Jasmine’s Head:

Rnd 1: In cream, make a magic circle. Work 6 sc in the center of the magic circle. Join to beginning of the round & tighten circle. Ch. 1.

Rnd 2: Work 2 sc in each st around. Join and ch 1.

Rnd 3: *2 sc in first st, 1 sc in next st* – repeat around. Join and ch 1.

Rnd 4: *2 sc in first st, 1 sc in each of the next 2 sts* – repeat around. Join & ch 1.

Rnds 5-8: Work 1 sc in each st around. Join & ch 1.

Insert the 6mm safety eyes into the 7th round at the front of the doll’s face so that there are 2 empty sc spaces between them. You will not be able to insert the safety eyes once you finish the head! See photos for placement if needed.

Rnd 9: *sc2tog, 1 sc in each of the next 2 sts* – repeat around. Join & ch 1.

Rnd 10: *sc2tog, 1 sc in next st* – repeat around. Join & ch 1.

Carefully stuff the head, but do not overstuff!

Rnd 11: *sc2tog* – repeat around. Join & ch 1.

Rnd 12: Work 1 sc in each st around. Join and ch 1.

Pattern – Jasmine’s Body/Torso:

Rnd 13: Work 2 sc in each st around. Join and ch 1.

Rnd 14: Work 1 sc in each of the first 4 sts, 2 sc in next st, 1 sc in each of the next 4 sts, 2 sc in next st, 1 sc each of the next 2 sts. Join & ch 1.

Rnd 15: Work 1 sc in each of the first 4 sts, 3 sc in next st, 1 sc in each of the next 4 sts, 3 sc in next st, 1 sc in each of the next 4 sts. Join & ch1 (16 sts)

Rnd 16: *sc2tog* – repeat around. Join and ch 1.

Rnd 17-18: sc around. Join and ch 1.

Rnd 19: sc around. Change to turquoise. Join and ch 1.

Rnd 20: In turquoise, sc around. Join with a sl st and continue on to the legs.

Pattern—Jasmine’s Legs (make 2):

Note: When working the legs, you will do part of leg 1, then switch to do part of leg 2. You will then complete leg 2 and then return to leg 1.

First leg:

Rnd 1: Insert the hook in the first st of the rnd 20 for the body/torso. Work 1 sc in each of the next 4 sts. Ch 5. Join to the first st of this round. Ch 1.

Rnd 2: Work 2 sc in each of the next 4 sts. Then work 1 sc in each of the remaining 5 sts. Join and ch 1.

Rnd 3: Work 1 sc in each st around. Join and fasten off. Begin second leg.

Second leg:

Rnd 1: Insert hook into the fifth sc of rnd 20 for the body/torso (right next to where the chain stitches of the first round of the first leg begins to curve inward across the torso to form a circle) and ch 1. Work 1 sc in each of the next 4 sts. Work 5 sl st into the chain spaces of rnd 1 of the first leg (this joins the legs together). Join to the first st of this round. Ch 1.

Rnd 2: Work 2 sc in each of the next 4 sts. Then work 1 sc in each of the remaining 5 sts. Join and ch 1.

Rnd 3: Work 1 sc in each st around. Join and ch 1. Continue to the remaining leg rounds.

Remaining leg rounds (complete twice, once for each leg):

Rnd 4-5: Work 1 sc in each st around. Join and ch 1.

Rnd 6: *2 sc in first st, 1 sc in next st* – repeat around. Sc in last remaining st. Join and ch 1.

Rnd 7-8: Work 1 sc in each st around. Join and ch 1.

Rnd 9: *2 sc in first st, 1 sc in next st* – repeat around. Join and ch 1.

Rnd 10: Sc around. Join and ch 1.

Carefully stuff the leg, but do not overstuff!

Rnd 11-12: *sc2tog, sc in next st* – repeat around. Join and ch 1.

Rnd 13: *sc2tog* – repeat around. Join and fasten off, leaving a long tail. Use a tapestry needle to sew closed the remaining hole. Weave in ends.

Note: When you complete leg 2 and return to leg 1 to finish rnds 4-13, you will insert your hook into any space of rnd 3, ch 1, then complete rnds 4-13.

_DSC4142-2

Pattern – Jasmine’s Shoes/Feet (make 2):

Rnd 1: In dark gold, ch 6. sc in 2nd chain space from hook, sc, hdc, sc, 5 sc in last st of chain. Working on the other side of the chain, sc, hdc, sc, sc st in the last st. Join and ch 1.

Rnd 2: Working in the back loops only, sc around. Join and ch 1.

Rnd 3: Working in both loops, *sc2tog* – repeat around. Join and ch 1.

Insert a small amount of stuffing into foot, but do not overstuff!

Rnd 4: sc2tog, hdc2tog, sc2tog, sc2tog. Join and fasten off leaving a long tail.

Using a tapestry needle, bring the original yarn strand that resulted from making your starting chain (not the tail that was just cut in rnd 4) up to the toe of the shoe. Weave it through the toe of the shoe in an “x” shape, wrapping the yarn around itself in knots a couple of times. This makes the tip of the shoe pointy.

Pattern – Jasmine’s Arms (make 2):

Rnd 1: In cream, make a magic circle. Work 6 sc in the center of the magic circle. Join to beginning of the round & tighten circle. Ch. 1.

Rnd 2-6: sc around. Join and ch 1.

Rnd 7: sc around. Join and fasten off, leaving a long tail. Use a tapestry needle to sew closed the remaining hole at the top of the arm. Sew to body just below the white trim/neckline of the dress. See photos for placement. Weave in ends.

Pattern – Jasmine’s Top:

Rnd 1: In turquoise, ch 20. Turn your work.

Rnd 2: Starting in the 2nd chain space from hook, sl st in first 7 sts. Sc in next st. In next st, work 1 hdc, 2 dc, and 1 hdc. Sl st in next 2 sts. Ch 1. In next st, work 1 hdc, 2 dc, and 1 hdc. Sc in next st. Work 1 sl st in each of the remaining 7 sts of the row. Fasten off leaving a long tail.

Sleeves (make two): In turquoise, ch 10 and fasten off. Using the yarn tails and a tapestry needle, sew the sleeve details onto the doll so that the ends of the sleeve pieces meet under the arm and at the edge of Jasmine’s top. See photos for placement if necessary. Weave in ends.

Pattern – Jasmine’s Hair:

Note: Jasmine’s hair is made in a total of four different pieces: the main piece, two pieces for her bangs, and one piece for her multi-sectioned pony tail.

Main piece:

Rnd 1: In black, make a magic circle. Work 6 sc in the center of the magic circle. Join to beginning of the round & tighten circle. Ch 1.

Rnd 2: Work 2 sc in each st around. Join and ch 1.

Rnd 3: *2 sc in first st, 1 sc in next st* – repeat around. Join and ch 1.

Rnd 4: *2 sc in first st, 1 sc in next 2 sts* – repeat around. Join and ch 1.

Rnd 5: *2 sc in first st, 1 sc in next 3 sts* – repeat around. Join and ch 1.

Rnd 6: sc around. Join and ch 1.

Rnd 7: sc around. Join and fasten off.

Ponytail:

Rnd 1: In black, make a magic circle. Work 6 sc in the center of the magic circle. Join to beginning of the round & tighten circle. Ch 1.

Rnd 2: Work 2 sc in each st around. Join and ch 1.

Rnd 3: *2 sc in first st, 1 sc in next st* – repeat around. Join and ch 1.

Rnds 4-5: sc around. Join and ch 1.

Stuff this part of the ponytail with filling, but do not over stuff!

Rnd 6: *sc2tog* – repeat around. Join and ch 1.

Rnd 7: sc around. Join and ch 1.

Rnd 8: Work 2 sc in each st around. Join and ch 1.

Rnds 9-10: sc around. Join and ch 1.

Stuff this part of the ponytail with filling, but do not overstuff!

Rnd 11: *sc2tog* – repeat around. Join and ch 1.

Rnds 12-13: sc around. Join and ch 1.

Rnd 14: 2 sc in each st around. Join and ch 1.

Rnds 15-16: sc around. Join and ch 1.

Stuff this part of the ponytail with filling, but do not overstuff!

Rnd 17: *sc2tog* – repeat around. Join and ch 1.

Rnd 18: sc around. Join and ch 1.

Rnd 19: *2 sc in first st, 1 sc in next st* – repeat around. Join and ch 1.

Rnd 20: sc around. Join and ch 1.

Stuff this part of the ponytail with filling, but do not overstuff!

Rnd 21: *sc2tog, sc in next st* – repeat around. Join and ch 1.

Rnd 22: *sc2tog* – repeat around.

Rnd 23: sc around. Join and ch 1.

Rnd 24: *sc2tog* – repeat around. Join and fasten off. Weave in ends.

Using strands of turquoise yarn and a tapestry needle, wrap one strand several times around the gathered places of the ponytail. See photos for placement if necessary.

_DSC4143-2

_DSC4147-2

_DSC4139-2

_DSC4144-2

Bangs Pieces (make 2):

Rnd 1: In black, ch 8. Starting in 2nd chain space from hook: sc, sc, hdc, hdc, dc, 2 hdc in next st, 5 hdc in last st. Working on the other side of the chain: 2 dc in next st, dc, hdc, hdc, sc, sc, join to first sc of the round and fasten off, leaving a long tail.

Using a tapestry needle and the long tails, sew the ponytail piece onto the main piece so that it sits just below center. See photos for placement if necessary.

Lastly, sew the bangs pieces onto the front of the doll’s face at the front of the hairline, slightly off-centered so that they sort of fall to either side. The tapered ends meet in the middle of her forehead. See photos for placement reference if needed.

Pattern – Jasmine’s Headband:

Band, rnd 1: In turquoise, ch 20. Starting in 2nd chain space from hook, sc across. Fasten off.

Sapphire, rnd 1: In blue, make a magic circle.

Sapphire setting, rnd 1: In gold, make a magic circle. Work 6 sc in the center of the circle. Join and ch 1.

Sapphire setting, rnd 1: Work 2 sc in each st around. Join and fasten off.

Using the yarn tails and a tapestry needle, sew the sapphire to the gold sapphire setting. Sew the setting onto the center of the headband. Sew the entire headband (now in one piece) onto Jasmine’s head. (Be sure to make careful stitches in the middle sew that the headband does not move.) Weave in ends.

_DSC4146-2

Pattern – Jasmine’s Earrings (make 2):

Rnd 1: In gold, make a magic circle. Work 6 sc inside the circle. Join and ch 1.

Rnd 2: sc in each st around. Join and ch 1.

Rnd 2: *sc2tog* – repeat around. Join and fasten off, leaving a long tail.

Using the yarn tail and a tapestry needle, sew the earrings on to either side of Jasmine’s head. See photos for placement if necessary. Weave in ends.

Pattern – Jasmine’s Necklace:

Rnd 1: In gold, ch 12. Sl st in the 2nd chain space from hook. Ch 10 and fasten off.

Tie the necklace at the back of Jasmine’s neck and use a tapestry needle to stitch the back of the necklace down against the back of her neck and weave in ends. This keeps the necklace from moving about too much during play.

Or, if you prefer, tie the necklace ends together, weave in ends, and leave the necklace free and floating.

_DSC4149-2

Pattern – Jasmine’s Eyes (w/ yarn):

(Use this method if you are not going to be using the safety eyes for the doll.)

With a strand of black yarn, use a tapestry needle to hand-stitch the first eye onto the doll. Weave in ends. With another strand of black yarn, hand-stitch the second eye onto the doll so that there are two empty sc spaces between the eyes. See photos for placement if needed.

_DSC4154-2

Pattern – Magic Carpet:

Rnd 1: In blue, ch 10. Starting in 2nd chain space from hook, work 1 sc in each st across. Ch 1 and turn.

Rnds 2-13: Sc in each st across. Ch 1 and turn.

Rnds 14: Sc in each st across. Switch to dark purple. ch 1.

Rnd 15: In dark purple, work 3 sc in the first corner st, then work 1 sc in each of the next 12 sts, 3 sc in next st, 1 sc in each of the next 7 sts, 3 sc in next st, 1 sc in each of the next 12 sts, 3 sc in next st, 1 sc in each of the last 7 sts. Join and ch 1.

Rnd 16: Work 3 sc in the first corner st, then work 1 sc in each of the next 14 sts, 3 sc in next st, 1 sc in each of the next 9 sts, 3 sc in next st, 1 sc in each of the next 14 sts, 3 sc in next st, 1 sc in each of the last 9 sts. Join, change to gold, and ch 1.

Rnd 17: In gold, work 3 sc in the first corner st, then work 1 sc in each of the next 16 sts, 3 sc in next st, 1 sc in each of the next 11 sts, 3 sc in next st, 1 sc in each of the next 16 sts, 3 sc in next st, 1 sc in each of the last 11 sts. Join and fasten off. Weave in ends.

Tassels: Insert your hook into the corner of the carpet. Fold two yarn strands in half and use your hook to pull the folded pieces through the stitch and work a slip stitch to fasten the yarn strands tightly together. Trim the ends and roll them between your fingers to get a frayed look. Repeat for each corner.

_DSC4139-2

_DSC4145

_DSC4153-2

Isn’t she just too cute for words? She was so much fun to make, even if the pattern was difficult to figure out. I really love her pointed shoes and her adorable necklace.

Questions? Comments? Let me know!

Happy crafting!

***Please feel free to share this pattern with other crafters! You may make and sell products from my patterns, but I ask that you please link back to my post. Please do not copy this pattern and claim it as your own. Let’s share the yarn-crafting love!***

Disclaimer: This is solely a not-for-profit fan activity, and in no way intends to infringe on copyrights held by Disney, Disney Enterprises, or other professional Disney-related agencies.